Multigas detector GMI PS200

Portable multigas detector

Multigas detector GMI PS200 can be freely combined for measurement of combustible gas (%LEL), O2, H2S and CO. Very simple operation with two buttons. As standard, the instrument has a powerful built-in pump that can handle sampling with 30 meters of probe hose. The pump can be turned off at the touch of a key and the meter then functions as a diffusion instrument. If you do not need the pump option, you can get the instrument in a diffusion version at a reduced price. Charged via USB cable or 230 volts, as an option there is a charging cable for 12-volt sockets in vehicles.

Extremely long battery life with up to 80 hours in diffusion mode and 20 hours in pump mode. For further increased personal safety, the PS200 is equipped with an optional motion sensor function where you can set the instrument to sound an alarm if the instrument is not moved within a preset time.

Multigas detector GMI PS200

Multigas detector GMI PS200 is supplied with: Cable for data transfer to PC and charging from USB connector, charger for 230 volts, manual and data logging program on CD, Quick start guide and (for pumped instrument) 3 meter hose with quick connection nipple.

Combustible gas: 0 – 100 %LEL Catalytic combustion
Oxygen O20 – 25 vol% Electrochemical cell
Hydrogen sulfide H2S0 – 100 ppm Electrochemical cell
Carbon monoxide CO 0: – 1000 ppm Electrochemical cell
Operating time: 20 hours (80 hours without pump)
Charging time: About 4 hours (No USB charging)
Mode of operationRechargeable Lithium-ion battery
Enclosure: IP 67
Operating temperature: -20°C to +50°C
Dimensions: 121 x 59 x 32 mm (H x W x D)
Weight: 230 g ( with pump), 215 g (without pump)
Classification: ATEX Ex II 2G ia d IIC T4, MED (Wheelmark)

Product sheet PS200


Oxygen O2, Explosive gases, Toxic gases, Butane C4H10, Carbon monoxide CO, LEL Below the explosion limit, Methane CH4, Propane C3H8, Hydrogen sulphide H2S


ATEX, Display, Electrochemical, Catalytic, MED, Pump


Shopping Basket
Rulla till toppen