Gas detector ExTox ExSens-I

Gas detector ExTox ExSens-I is an EX-classified transmitter for most gases. Can be calibrated using RS485 communication, which simplifies maintenance work as gas-free declaration does not need to be made. May be installed in zone 1 and 2 according to the ATEX directive. The transmitter is equipped with a measuring principle suitable for the purpose and the gas (catalytic combustion, IR absorption, electrochemical cell or semiconductor).

Gas detector ExTox ExSens-I

Gas detector ExTox ExSens-I

Drive voltage: 24 +/- 6 VDC

Output signal: 4 – 20 mA, linear

Wiring: 5 x 0,5 mm2 (max. 1000 m = 9 ohm)

Enclosure: Aluminum alloy / Stainless steel

Protection class: IP65 – sensor opening excluded

Dimensions / weight: 170 x 145 x 100 mm / 2,5 kg

ATEX-Classification: II 2G EEx d IIC T4

Contact us for data sheets


ATEX, Electrochemical, Semiconductor, IR, Catalytic, RS485


Oxygen O2, Explosive gases, Toxic gases, Ammonia NH3, Butane C4H10, Cyclohexane C6H12, Ethylene C2H4, Freon R123A, Carbon dioxide CO2, Carbon monoxide CO, Nitrogen dioxide NO2, Nitrogen monoxide NO, Refrigerant R404A, Refrigerant R407C, Methane CH4, Pentane C5H12, Propane C3H8 , Sulfur dioxide SO2, Hydrogen sulfide H2S, Hydrogen chloride HCl, Hydrogen H2


Shopping Basket
Rulla till toppen